6 www.kodak.com/go/support
Taking pictures/videos
Using the auto-focus framing marks (for pictures)
When using the LCD or EVF as a viewfinder, framing marks indicate the camera focus
area. The camera attempts to focus on foreground subjects, even if the subjects are
not centered in the scene.
1 Press the Shutter button halfway.
When the framing marks turn green, focus is
accomplished.
2 If the camera is not focusing on the desired subject
(or if the framing marks disappear), release the
Shutter button and recompose the scene.
3 Press the Shutter button completely down to
take the picture.
NOTE: Framing marks do not appear in all modes. When you use Focus Zone and set Center Zone, the
framing marks are fixed at Center Wide.
Framing marks
To Next Page
Loading...
Need help?
General
