44 www.kodak.com/go/support
Transferring and printing pictures
Transferring pictures
IMPORTANT:
If your camera was packaged with a Kodak EasyShare dock, use the dock to
transfer pictures to your computer. (See
page 47 and the dock user’s guide for details.)
If you do not have an EasyShare dock, use the USB cable (U-8) that came with your camera.
1 Turn off the camera.
2 Plug the labeled end of the USB cable into the
labeled USB port on your computer. See your
computer user’s guide for details.
3 Plug the other end of the USB cable into the USB
port on the camera. The arrow icon on the cable
should face you.
4 Turn on the camera.
EasyShare software opens on your computer. The
software prompts you through the transfer process.
NOTE: Visit
www.kodak.com/go/howto
for an online tutorial on connecting.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
■ Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 47)
■ Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or
www.kodak.com/go/z712accessories.
To Next Page
Loading...
Need help?
General
