34 www.kodak.com/go/support
Doing more with your camera
Taking panoramic pictures
Use panorama to “stitch” up to 3 pictures into a panoramic scene.
NOTE: For best results, use a tripod. (For a steady shutter release on a tripod, see page 11.)
Only the panoramic picture is saved; individual pictures are not. Picture size is set to 5.0 MP.
Exposure and white balance are set with the first picture. The flash is set to Off.
1 Turn the Mode dial to SCN.
2 Press to highlight Panorama Left-Right or Panorama Right-Left (depending
on the direction you want to pan), then press OK (or keep the SCN mode
highlighted).
3 Take the first picture.
After a quickview, the LCD displays the liveview and an “overlay” from the first picture.
4 Compose the second picture. Make the overlay from the first picture cover the
same portion in the new picture. (You can press the Delete button to re-take a
picture.)
5 If you are taking only 2 pictures, press OK to stitch them together.
After you take 3 pictures, the pictures are automatically stitched together.
Take 2 or 3
pictures.
Get 1
panoramic picture.
1
2
3
To Next Page
Loading...
