Working with pictures/videos
www.kodak.com/go/support
21
Running a slide show
Use the Slide Show to display your pictures and videos on the camera. To run a slide
show on a television or on any external device, see
page 22. To save battery power,
use an optional Kodak 3-volt AC adapter. (Visit www.kodak.com/go/z712accessories.)
Starting the slide show
1 Press the Review button, then press the Menu button.
2 Press to highlight Slide Show, then press OK.
3 Press to highlight Begin Show, then press OK.
To interrupt the Slide Show, press OK.
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can set the display
interval from 3 to 60 seconds.
1 On the Slide Show menu, press to highlight Interval, then press OK.
2 Select a display interval.
3 To scroll through the seconds quickly, press and hold .
4 Press OK.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press to highlight Loop, then press OK.
2 Press to highlight On, then press OK.
3 Press to highlight Begin Show, then press OK.
The slide show repeats until you press OK or until battery power is exhausted. The Loop
feature remains until you change it.
To Next Page
Loading...
Need help?
General
