Kodak i1220 - Final Configuration Check

Kodak i1220 Scanner Installation and Configuration Guide Version: 4/3/2012
Page | 13
Important  If ‘SCEIS Default’ is not at the top of the list, highlight ‘SCEIS Default’ and click ‘Move Up’ to put it at the
top.
Click ‘OK’ at the bottom of the screen.
Close the Scan Validation Tool window.
The Kodak scanner is now ready for SCEIS imaging.
If the scanner does not perform as follows contact the SCEIS Help Desk.
 Scan in black and white
 Scan front side of pages
 Ignore back side of pages if backside is blank
 Scan back side of pages if there is information on the back side
 Scan page lengths from small pieces of paper (bank slips) to legal size paper (8.5 x 15)
 Stop scanning if paper length is longer than legal size
 Stop scanning if multiple pages get pulled through the scanner at once by mistake (multifeed detection)