Kodak LUMA 350 Quick Start Guide

CONNECTING TO AN EXTERNAL DEVICE
To access photos or videos stored on any USB drive, insert the drive into the
corresponding port on the side, then navigate to Source > File Browser. If you’re
using an HDMI compatible device, connect an HDMI cable from the device to
your projector to access and view images and pictures. An HDMI-to-HDMI cable
is included. If your device requires an adapter, you will need to purchase it
separately. For audio devices or headphones, there is an AUDIO OUT jack on
the left side.
NOTE: If you connect an HDMI device as well as a USB drive, the HDMI device
will take precedence over the USB drive and you will need to disconnect it to
access the other connected sources.
EN | 10

Kodak LUMA 350 Specifications

General

Display Technology	DLP
Resolution	854 x 480 (WVGA)
Contrast Ratio	3500:1
Light Source	LED
Built-in Speaker	Yes
Aspect Ratio	16:9
Lamp Life	30, 000 hours
Internal Memory	16 GB
Throw Ratio	1.2:1
Connectivity	HDMI, USB
Operating System	Android
Weight	450 g