EN | 8
USING YOUR PHONE
CHARGING THE PROJECTOR
Before using the projector, connect it to the charger and allow it to fully charge.
Always use the original charger that was provided to ensure proper charging.
If the red indicator LED light is flashing, this means that the battery is low.
While the projector is charging, the indicator LED will be a solid red light. Once
charging completes, the indicator LED will change to a solid white light.
For greater ease of use and a more intuitive experience, you can control the
projector with the KODAK LUMA Companion App from the Apple App Store or
the Google Play store.
Once installed, you can use your phone as a remote to navigate through menus,
mirror your screen, easily input login information for apps, and control media
volume. Make sure to try out the reverse screen mirroring feature, which allows
you to view the LUMA interface directly on your phone, and navigate that way!
1. Search for the KODAK LUMA in your phone’s app store.
2. Download the app, and make sure that your phone is connected to
the same Wi-Fi network as the projector.
3. Open the app and follow the instructions to pair it with the
projector to enable remote functionality.
To Next Page
Loading...
Need help?
General
