40
Settings of Camera:
Press the
/
button to select
options to be adjusted, and press the
button to enter the setting interface.
Wi-Fi Mode
Cancel
Change Password
Setting pre-connected device for the
following serial number:
SSID:
PIXPRO AZ528_XXXX
WPA2-PSK: XXXXXXXX
• Change Password: Enter the WPA2
PSK password refresh interface.
Yes: Create a new WPA2 PSK
password.
No: Back to previous page.
• Cancel: Back to previous page.
Rotate the mode dial to and then enter
the Wi-Fi® selection interface.
●
To ensure a stable connection, please connect
to the new camera in Wi-Fi settings
●
Ensure that the password is correct.
Next
• Next: Enter the SSID interface.
Rotate the mode dial to disconnect.
To Next Page
Loading...
