Kodak PIXPRO Astro Zoom AZ528

51
Settings under mode (unset state or
state after reset):
1. Turn the mode dial to select the
mode, and enter the setup screen, as
shown in the igure below:
Select one capture mode to define CS .
Auto Mode
Save
Exit
2. As shown in the picture, press the
A
C
/
CA
button to select a capture
mode that you want to deine as ,
and press the button to enter the
shooting screen.
3. As shown in the picture, press the
button to conirm setting or to exit
without setting by turning the mode
dial.
Rotate the mode dial to skip .
Go to setting CS mode.
Yes
Or
For setting under other modes (use this
method to select a dierent custom
setting):
1. Select any mode or scene mode to be
stored.
2. Set your desired parameters in the
current mode.
Custom Settings
The user can store the frequently used shooting modes and parameters and switch to
this mode for quick adjustment.