Kodak PIXPRO AZ501

82 8382 83
FW Version
Use this setting to view the current camera
firmware version.
1. Press the
button, press the up/down
arrow button to select and press the
button to enter the menu.
2. Press up/down arrow button to select
and press the button or right arrow
button to enter the menu.
3. Press the up/down arrow button to select
「FW Version」and press the button
or right arrow button to enter the menu.
4. When there is a new firmware version in
the SD card, select「Yes」to update.
Reset
Use this setting to restore the camera to its
original default settings.
1. Press the
button, press the up/down
arrow button to select and press the
button to enter the menu.
2. Press up/down arrow button to select
and press the button or right arrow
button to enter the menu.
3. Press the up/down arrow button to select
「Reset」and press the button or
right arrow button to enter the menu.
4. Press the up/down arrow buttons to
select「Yes」or「No」and press the
button to confirm.