88 8988 89
Connecting to your Printer
1. Make sure the printer is turned on.
2. Connect one end of the supplied USB
cable to the USB port on your camera.
3. Connect the other end of the cable to the
USB port on the printer.
If the camera is not connected to a
PictBridge compatible printer, the
following error message will appear on the
LCD screen.
The error message above will also
appear if the USB mode is set
incorrectly, in which case you should
disconnect the USB cable, check the
USB mode settings, ensure that the
Printer is turned on, and then try
connecting the USB cable again.
To Next Page
Loading...
