Kodak PIXPRO AZ652

38
Every AZ652 camera is shipped
with a default factory Wi-Fi®
password that is randomized and
unique to that camera and will not
change unless you wish to reset
the password with a new randomly
generated password. If you wish to
change the Wi-Fi® password in your
AZ652 from the assigned, unique
factory password, you can do so
by selecting and using the Change
Password setting. If “Yes” is selected,
a new random password will be
generated and saved in the camera
until changed or if you use the
“Reset” function. If you reset your
AZ652 to the factory settings, then
the initial, randomly factory assigned
and unique Wi-Fi® password will be
restored to your camera. (Please
refer to Reset instructions on page
107).
Settings of Smart Device:
1. Enable the Wi-Fi® of smart device
and then search surrounding wireless
devices.
2. Select the name of camera SSID to be
connected and then input the eight-
digit number password after WPA2PSK
on the camera.
3. Click the icon of the PIXPRO Remote
Viewer APP to enable the APP.
Set up completion:
Once the APP is connected to the camera,
functional operation can be enabled on the
connected smart device.