Kodak PIXPRO AZ652

49
Custom Settings ( )
The user can store frequently used
shooting modes; and parameters and
switch to this mode for a quick adjustment.
Settings under mode (unset state or
state after reset):
1. Turn the Mode dial to select the
mode, and enter the setup screen, as
shown in the igure below:
Select one capture mode to define CS .
Auto Mode
Confirm
Exit
2. As shown in the igure above, press the
[ ]/[ ] button to select a
capture mode that you want to deine
as , and press the button to enter
the shooting screen.
3. As shown in the igure, press the
button, and choose whether to
continue the mode setting or rotate
the Mode dial to skip.
Or
Go to setting CS mode
Rotate the mode dial to skip.
Yes
For setting under other modes (use this
method to select a different custom
setting):
1. Select any mode to be stored.
2. Set your desired parameters in the
current mode.
3. Press the button, press the [ ]
/[ ] button to select , and
press the button to enter the menu.
4. Press the [ ]/[ ] button to select
.