22
23
Vari-Angle LCD
The LCD is housed in the camera’s body. You may follow the directions shown below to
move it as needed:
1. Open the LCD panel along the direction shown by arrow ①.
2. Rotate up to 180° along the direction shown by arrow ②.
3. Rotate up to 90° along the direction shown by arrow ③.
4. Close the LCD along the direction shown by arrow ④.
Please don’t rotate the LCD with excessive force to prevent damages.
Please close the LCD along the direction shown by arrow ④ after use to protect it
from scratches.
To Next Page
Loading...
