Kodak pixpro fz201

21
Resetting Date/Time
After you set your Date/Time for the first time, follow
the instructions below to reset date and time.
1. Press the button, press the up/down button to
select , and press the button to enter the
menu.
2. Press the up/down button to select , and press the
button or right button to enter the menu.
3. Press the up/down button to select「Date & Time」
and press the button or right button to enter the
menu.
4. Press the left/right button to select the Date/Time
to be adjusted: Time is displayed in YYYY.MM.DD
HH:MM.
5. Press the up/down button to press the value for your
selected block. After you finish your settings, press
the button to confirm.
6. Press the button and the following snapshot
screen appears.