Kodak pixpro fz201

35
Flash Mode
The flash provides supplemental light for the scene. The
flash is usually used when shooting against the light to
highlight the object; it is also suitable for metering and
shooting in darker scenes to improve the exposure.
1. Press the flash pop up button to pop up the
flash.
2. Press the right button ( ) to enter the flash settings
menu.
3. Press the left/right button to select the following 6
modes:
• Force Off
Flash is turned off.
• Flash Auto
Camera flash goes off automatically based
on existing light conditions.
• Force Flash
The flash will engage with each shot even
if there is enough available light to take the
photo without flash.
• Slow Sync.
This allows you to take pictures of people at
night that clearly show both your subjects
and the night time backdrop. The use of a
tripod is recommended when shooting with
this setting.
• Slow Sync. + Red-Eye
Use this mode for slow synchrony shots
with red-eye reduction.
• Red-Eye Reduction
The camera emits a brief pre-flash before
the picture is taken to reduce red-eye
effects.
4. Press the button to confirm the settings and enter
the shooting screen.