Kodak pixpro fz201

73
Connecting to a PictBridge Compatible Printer
PictBridge technology allows printing of the
photos saved in the memory card by the
printer.
To find out if a printer is PictBridge
compatible, simply look for the PictBridge
logo on the packaging or check the owner's manual for
specifications. With the PictBridge function on your
camera, you can print the captured photos directly to
a PictBridge compatible printer using the supplied USB
cable, without the need for a PC.
Setting the USB Mode
The camera’s USB port can be set to connect with either
a PC or a Printer, the following steps will ensure that the
camera is correctly configured to connect with a Printer.
1. Press the button, press the up/down button to
select and press the button to enter the menu.
2. Press up/down button to select and press the
button or right button to enter the menu.
3. Press the up/down button to select「USB」and press
the button or right button to enter the menu.
4. Press the up/down button to select「Printer」and
press the button to confirm.
After the camera is reset, it will switch to PC mode
automatically from USB mode.
See “Using the PictBridge Menu“ section on page
75.