80
This camera supports wireless connection for Eye-Fi memory cards. Enable the Eye-Fi connection by following the steps
below.
1. Press the button, press the up/down button to select and press the button to enter the menu.
2. Press the up/down button to select and press the button or right button to enter the menu.
3. Press the up/down button to select「Eye-Fi」and press the button or right button to enter the menu.
4. Press the up/down buttons to select「On」or「Off」and press the button to confirm.
If the Eye-Fi card is not available in the camera, this feature is not displayed.
Set Eye-Fi SD Card Connection Mode
To Next Page
Loading...
