86
Message Description Action
Connection Failed!
In the case of failing to connect to a PC or a printer.
Remove transmission line
to stop connection, and the
message is removed.
Warning! Do not turn off your
camera during update!
The message appears during the firmware update
process.
The message disappears
after the camera update and
restart.
Remove USB Cable !
Indicates that you can disconnect the Micro USB
cable.
The message disappears after
you disconnect the Micro USB
cable.
Write Protect !
When you boot, press the shutter button or edit
the files under playback mode, and the SD card is
locked, the message appear.
The message will disappear
after 2 seconds.
Card Full !
When you boot, press the shutter button or edit
the files under playback mode, and the SD card is
locked, the message appear.
The message will disappear
after 2 seconds.
Memory Full !
When you boot, press the shutter button or edit
the files under playback mode, and the SD card is
locked, the message appear.
The message will disappear
after 2 seconds.
To Next Page
Loading...
