Kodak PIXPRO FZ51 - Camera Reset and Firmware

71
Copy to Card
Use this setting to copy the files stored in the internal
memory to an SD memory card.
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to select
「Copy to Card」and press the button or right
arrow button to enter the menu.
4. Press the up/down arrow buttons to select「Yes」
or「No」and press the button to confirm.
If there is no card available in the camera, this
function will not be displayed.
File Numbering
After you take a picture or video clip, the camera will
save it with a sequential number. You can use this to
reset the file numbering to 1.
1. Press the button, press the up/down arrow button
to select and press the button to enter the
menu.
2. Press up/down arrow button to select and press
the button or right arrow button to enter the
menu.
3. Press the up/down arrow button to select「File
Numbering」and press the button or right arrow
button to enter the menu.
4. Press the up/down arrow buttons to select「Yes」
or「No」and press the button to confirm.