Kodak PIXPRO FZ51 - Print DPOF Images; Exit

82
Print DPOF Images
To use DPOF printing, you must select your photos
for printing using the DPOF settings beforehand. See
“DPOF” section on page 66.
1. In the PictBridge menu, select「Print DPOF Images」
and the screen as shown below appears.
2. Select「Yes」and press the button to confirm;
select「Cancel」to cancel printing.
Exit
Select「Exit」to exit the PictBridge menu. At this time,
the message「Remove USB Cable!」appears on the
screen.
Disconnect the micro USB cable from the camera and
printer.