To Next PageTo Next Page
Need help?Do you have a question about the Kodak Prostar and is the answer not in the manual?
General| Brand | Kodak |
|---|---|
| Model | Prostar |
| Category | Computer Hardware |
| Language | English |
User precautions for operating the Archive Processor safely and correctly.
Information regarding the sound pressure levels emitted by the processor.
Statements concerning Electromagnetic Compatibility (EMC) regulations for the device.
Description of the front view and components of the Archive Processor.
Description of the rear view and components of the Archive Processor.
Steps for initiating the Archive Processor at the beginning of the day.
Procedure for opening the main processing section cover.
Instructions for filling the fixer tanks with the correct solution.
Instructions for filling the developer tank with the correct solution.
Steps for correctly installing the film processing racks into the unit.
Procedure for installing the dryer rack into the drying section.
Guide to setting the correct inlet water temperature for the processor.
How to adjust the developer temperature control for optimal processing.
Method for accurately reading the developer temperature using the dial thermometer.
Procedure for modifying the developer temperature setpoint value.
Steps to verify the dryer temperature is within the operating range.
How to adjust the dryer temperature control for optimal drying.
Procedure to ensure the film transport system is functioning correctly.
Methods for attaching processed film to the take-up reel.
Instructions for using a trailer holder (snubber) to attach film.
Steps for creating a loop in the film for proper reel attachment.
Criteria and conditions to begin film processing operations.
Detailed steps for processing a single strand of film through the processor.
Procedure for processing two reels of film simultaneously using dual-strand spindles.
Tables detailing recommended frequencies for replenishing developer and fixer.
Guidelines for processing mixed sizes of film and chemical usage ratios.
Procedure for safely changing the processing chemicals in the tanks.
Information on using the optional Kodak Prostar Replenishment Unit for automatic replenishment.
Daily procedures for cleaning the Archive Processor after use.
Periodic cleaning procedures for the Archive Processor to remove deposits.
Detailed steps for cleaning the developer racks and tank thoroughly.
Procedure for cleaning fixer racks, wash racks, and fixer tanks.
Instructions for changing the air filter every six months.
Step-by-step guide to safely clear a film jam from the processor.
A chart listing common problems, their possible causes, and remedies.
Warranty terms and conditions for Archive Processors installed in the United States.
Warranty terms for Archive Processors installed outside the United States.
