A-62051 May 2008 5
Rear
A Usage Meter — displays the total number of hours the film
transport motors have been operating. You can use the usage
meter to determine when to change the processing chemicals.
B Water Inlet — connection to thermostatic mixing valve.
C Water Outlet — connection to drain line.
D Accessory Receptacle — supplies power to the optional
automatic Replenishment Unit accessory.
E Power Receptacle — connection for main power cord.
F Circuit Breaker — safety feature in case of electrical overload.
G Hose Input — connectors for the optional automatic
Replenishment Unit accessory hoses.
To Next Page
Loading...