Kodak RVG 6100 User Manual

3
Acquiring an image
1 Open the patient file in Kodak Dental Imaging Software.
To launch an RVG image acquisition,
click RVG Acquisition on the toolbar.
Check that the RVG icon in your toolbar is red.
If the icon is not red,
check that the sensor is properly connected
to the computer.
If not, disconnect and reconnect the RVG sensor.
2
Cover the sensor with a disposable sheath
and place the sensor on the applicable positioner.
Guide_RVG6100_5100_GB 21/08/06 14:31 Page 3

Kodak RVG 6100 Specifications

General

Brand	Kodak
Model	RVG 6100
Category	Medical Equipment
Language	English