Need help?Do you have a question about the Kodak M35 and is the answer not in the manual?
General| Flash modes | Auto |
|---|---|
| Built-in flash | Yes |
| Camera type | Compact film camera |
| Country of origin | China |
| Film speed setting (ISO) | 200 - 400 |
| Focal length range | 31 mm |
| Lens structure (elements/groups) | 1/1 |
| Battery type | AAA |
| Battery technology | Alkaline |
| Number of batteries supported | 1 |
| Closest focusing distance | 1 m |
| Camera shutter speed | 1/120 s |
| Product color | Gray |
Weight and Dimensions| Width | 114 mm |
|---|---|
| Height | 63 mm |
| Weight | 143 g |
General information about ESD and its impact on equipment.
Steps to prevent ESD damage to electronic components and equipment.
Importance of ESD awareness for all personnel for effective control.
Specific safety guidelines to avoid static electricity generation near components.
List of specialized tools required for service procedures.
Key technical specifications including film sizes, speed, temperature, and power.
Physical measurements of the processor.
Details of the main drive motor specifications.
Details of the blower motor specifications.
Volume of the developer, fixer, and wash tanks.
Types of film and chemicals compatible with the processor.
Information on site requirements for the processor.
Description of the replenishment system's pump.
Procedures related to the feed shelf, including adjustment and material replacement.
Steps for adjusting and replacing detector switches.
Procedures for adjusting squareness and replacing guide shoes.
Procedures for adjusting squareness for rack assemblies.
Procedures for adjusting drive chain tension and replacement.
Procedures for adjusting squareness, disassembly, and roller replacement.
Procedures for adjusting drive chain and aligning the main drive motor.
Procedures for adjusting dryer temperature and replacing components.
Procedures for adjusting developer temperature and replacing components.
Procedures for replacing the recirculation pump and O-ring.
Procedures for replacing and adjusting replenishment pumps.
Diagrams illustrating the plumbing system for M35 and M35A processors.
General notes and warnings for performing periodic maintenance.
Table detailing parts, lubricants, frequency, and procedures for lubrication.
Schedule outlining weekly and monthly checks for various components.
Troubleshooting steps for film transport issues.
Troubleshooting steps for surface defects on film.
Troubleshooting steps for incorrect film densities.
Troubleshooting steps for wet film issues.
Troubleshooting steps for low solution levels.
Troubleshooting steps for film overlapping.
Diagrams related to dryer temperature control and main drive.
Diagrams for the replenishment control system.
Diagrams related to developer temperature control.
Comprehensive diagrams for the entire processor system.
To Next Page
