Kodak M35 User Manual

Dimensions Main Drive Motor
The MAIN DRIVE MOTOR is an open-frame
Height: 52 cm (20.5 in.)
gearhead motor with an automatic thermal overload
Width: 67.3 cm (26.5 in.)
protector.
Depth: 1.27 metres (50 in.) overall,
from the end of the FEED SHELF to
the end of the RECEIVING BIN
Blower Motor
Weight: approximately 90 kg (200 pounds)
The BLOWER MOTOR is equipped with an
empty
automatic thermal overload protector.
Films and Chemicals
Capacity of the Tanks with Racks Installed
The KODAK M35 and M35A X-OMAT Processors
The developer, fixer, and wash tanks each contain
accept film that can be processed in KODAK RP
7.8 litres (2.07 gallons).
X-OMAT Chemicals.
The RECIRCULATION PUMP for the developer and
Site Specifications
the fixer consists of a thermally protected MOTOR
that operates two magnetic, centrifugal pumps.
Publication No. 981157 contains the site
specifications for the KODAK M35 and M35A
X-OMAT Processors.
Replenishment Pump
The replenishment system uses a positive
displacement BELLOWS PUMP, designed for
accurate delivery of replenishment solutions
regardless of the solution level in the REPLENISHER
TANKS.
981777 1-3

Kodak M35 Specifications

General

Flash modes	Auto
Built-in flash	Yes
Camera type	Compact film camera
Country of origin	China
Film speed setting (ISO)	200 - 400
Focal length range	31 mm
Lens structure (elements/groups)	1/1
Battery type	AAA
Battery technology	Alkaline
Number of batteries supported	1
Closest focusing distance	1 m
Camera shutter speed	1/120 s
Product color	Gray

Weight and Dimensions

Width	114 mm
Height	63 mm
Weight	143 g