Replacement of the Main Drive Shaft, Worm Gears, or Bearing Blocks
[1] Remove the CHAIN GUARD. [4] Remove the 4 SCREWS from the 2 BEARING
BLOCKS.
[2] Loosen the 4 MOUNTING SCREWS.
[5] Remove the DRIVE SHAFT ASSEMBLY from
[3] Remove the DRIVE CHAIN.
the processor.
H112_0101DA
GUARD
CHAIN
SETSCREW
SHIM (2)
WORM
GEAR
DRIVE
SHAFT
SCREW
(4)
BEARING
BLOCK (2)
MOUNTING
SCREW
(4)
DRIVE
CHAIN
H112_0101DCA
SPACER
PIN
Replacement of the Main Drive Shaft
981777 2-19
To Next Page
Loading...
