Replacement of the A Rollers
NOTE [2] Install the:
• new A ROLLER on the SHAFT
Each TURNAROUND ASSEMBLY has
• A ROLLER in the TURNAROUND
2 A ROLLERS.
ASSEMBLY
[1] Remove the:
• LOCKING PLATE
• 2 SPRINGS • 2 SPRINGS
• LOCKING PLATE
[3] Check that all the GEARS in the
• SCREW TURNAROUND ASSEMBLY engage.
• A ROLLER from the SHAFT
H112_0075EA
GEAR
SHAFT
A ROLLER
GEAR
SHAFT
A ROLLER
GEAR
SPRING (2)
LOCKING
PLATE
SCREW
H112_0075ECB
Replacement of the A Rollers
2-12 981777
To Next Page
Loading...
