Dryer
[1] Check that all ROLLERS rotate freely.
[2] Check for broken GEARS. Install new
ROLLERS if necessary.
[3] Remove dirt and dust from the AIR TUBES.
[4] Check the SPRINGS, not shown, for wear.
Install new SPRINGS if necessary.
[5] Check the temperature at the bottom of the
DRYER on the drive side of the processor.
[6] Rotate the DRYER TEMPERATURE
CONTROL KNOB to adjust the temperature if
necessary. See page 2-21.
NOTE
H112_0089AC
KNOB
CONTROL
TEMPERATURE
DRYER
H112_0089ACD
The temperature of the DRYER should
be as low as possible for drying the
film.
H112_0095BA
H112_0095BCA
GEAR
ROLLER
AIR TUBE
SPRING
Checking the Dryer Rack
3-8 981777
To Next Page
Loading...
