Kodak M35 - Replacement of the Drive Roller

Replacement of the Drive Roller
[1] Remove the: [2] On the non-drive side, remove the
• top and bottom COVERS from the DRYER • O-RING from the COLLAR
RACK
• PIN
• PLENUM
• COLLAR
• first 3 AIR TUBES
[3] On the drive side, remove the O-RING from
• O-RING from the DRIVE GEAR
the DRIVE ROLLER.
• PIN
[4] Remove the PIN from the DRIVE ROLLER.
• DRIVE GEAR
[5] Remove the SHAFT from the DRIVE
ROLLER.
[6] Reverse the procedure to install the new
DRIVE ROLLER.
H112_0103DA
H112_0103DCA
COVER
AIR TUBE
O-RING
ROLLER
DRIVE
SHAFT
PIN
O-RING
DRIVE GEAR
PIN
COVER
PLENUM
COLLAR
PIN
O-RING
Replacement of the Drive Roller in the Dryer Rack
2-16 981777