[4] Check the tension of the SPRINGS.
[5] Check the BEARINGS. If a ROLLER does not rotate freely on the SHAFT, install new BEARINGS.
[6] Check that the ROLLERS move freely in the slots of the LOCATING PLATES.
[7] Check that the surfaces of the ROLLERS are smooth.
[8] Wipe all ROLLERS with a damp cloth or sponge.
H112_0108DA
H112_0108DCA
BEARING
SHAFT
BEARING
SPRING
PLATE
LOCKING
ROLLER
top view
bottom view
Checking the Turnaround Assemblies
981777 3-7
To Next Page
Loading...
