PLEASE NOTE
The information contained herein is based on the experience and knowledge relating to the subject matter gained by
Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and makes no warranty, express
or implied, with respect to this information. Kodak shall not be liable for any loss or damage, including consequential or
special damages, resulting from the use of this information, even if loss or damage is caused by Kodak’s negligence or
other fault.
This equipment includes parts and assemblies sensitive to damage from electrostatic discharge. Use
caution to prevent damage during all service procedures.
Related Publications for the M35 and M35A Processors
This publication is part of a series of instruction books that provide technical support information on the KODAK
M35 and M35A
X-OMAT Processors. It is recommended that these publications be kept in the binder provided.
If an individual book is misplaced or destroyed, order another copy from your Eastman Kodak Representative
using the Publication Part Numbers below.
981778
PARTS LIST
SERVICE
MANUAL
981777981158
MANUAL
OPERATOR
981157
SITE SPECS
INSTALLATION
INSTRUCTIONS
981159
981797
BINDER
COMPLETE
H112_9002BC
2 981777