A-61981 20 April 2022 33
Wired Network Settings
If you are using Wired Networks, select Automatic or Manual network
address configuration.
In the Automatic setting, the network will assign an IP address to the scanner.
To connect the scanner to a static IP address:
1. Select Manual.
2. Select Settings.
3. Using the touch screen key pad, enter the Static IP Address, Subnet Mask,
and Default Gateway (optional).
To connect the scanner to a DNS Server (Domain Name Server):
1. Select Manual.
2. Select DNS Settings.
3. Using the touch screen key pad, enter the IP address for the Preferred
DNS server and Alternate DNS server (optional).
To Next Page
Loading...
