Kodak S2060w User Manual (English)

Questions and Answers:

D
Dominic AdkinsAug 5, 2025
Why is my Kodak Scanner running slow?
- S
  stephen30Aug 6, 2025
  There are several reasons why your Kodak scanner might be running slow: * Your PC may not meet the minimum requirements for the scanner. * The scanner is designed to operate with USB 3.1 or USB 2.0, but will function in a USB 1.1 port. If you are using a USB 1.1 connection, update your USB connection. * When scanning wirelessly, other network traffic can slow performance. * Several settings, such as active feeding and enhanced stacking, can slow the scanner. Experiment to find the settings that work best for you.
A
Ashley BrooksAug 9, 2025
What to do if images are not being cropped correctly with my Kodak S2060w?
- M
  Mr. Todd WilliamsAug 10, 2025
  If the cropping options (Automatically Detect and Straighten or Automatically Detect) are enabled and your images are not being cropped correctly, clean the imaging area. Also, ensure that the pages are straightened in the input tray before scanning.
A
amandarobertsAug 13, 2025
How to fix Kodak Scanner that will not scan or feed pages?
- W
  williamsimpsonAug 14, 2025
  If your Kodak scanner won't scan or feed pages, check the following: * Ensure the power adapter is securely plugged into the back of the scanner and the wall outlet. * Verify the wall outlet is not defective. * Confirm the PC was restarted after installing the software. * Make sure the page(s) are in contact with feed rollers and the paper present sensor. * Check that the scanner power light is on and the display screen indicates the scanner is ready.
T
Thomas MooreAug 19, 2025
What to do if my Kodak Scanner images have black background bleed-through?
- K
  Kristin BishopAug 19, 2025
  When scanning translucent paper, black bleed-through may appear on the image. To minimize this, adjust the Contrast and Brightness values or select Draft (Fixed) in TWAIN or Fixed Processing in ISIS to improve the image.
T
Tina RamirezAug 22, 2025
Why does my Kodak S2060w show 'Length protection active' message?
- C
  courtney21Aug 22, 2025
  The “Length protection active” message appears because the combination of driver settings may result in a jam message when scanning occurs. If a jam message occurs, adjust one or more of these settings in the scanner driver: * reduce the maximum document length * lower the image resolution * turn on compression * lower compression quality * change to simplex scanning * change the image type (color, gray scale, or black and white) * turn off Dual Stream * turn off Auto Color Detection.
B
Beth MorrisAug 27, 2025
What causes roller marks on paper after scanning with Kodak Scanner?
- J
  Jennifer SmithAug 27, 2025
  Roller marks can appear on the paper after scanning if the rollers are dirty. Scanning pages with wet ink will cause ink to transfer to the tires, and from the tires to your pages. Do not scan pages unless the ink on them is dry.
D
dmcphersonAug 31, 2025
What to do if paper is too wide for the input tray of my Kodak Scanner?
- S
  staylorAug 31, 2025
  If the paper is too wide for the input tray: * Move the side guide lock to the LTR setting if it is on the A4 setting. * For oversize pages, see “Oversize paper” on page 35.

Kodak S2060w Specifications

General

Optical Resolution	600 dpi
Daily Duty Cycle	7, 000 pages
Duplex Scanning	Yes
Scanning Technology	CIS (Contact Image Sensor)
Color Depth	24-bit
Connectivity	USB 3.2
ADF Capacity	80 sheets
Output File Formats	PDF, JPEG, TIFF
Supported Operating Systems	Windows, Mac, Linux
Max Document Size	8.5" x 14"
Scan Speed	Up to 60 ppm / 120 ipm at 200/300 dpi