Kodak S2000 Series - User Manual

Questions and Answers

J
Jamie WarrenAug 2, 2025
Why is my Kodak Scanner running slow?
- H
  Heather KirbyAug 2, 2025
  There are several reasons why your Kodak scanner might be running slow: * Your PC may not meet the minimum requirements for the scanner. * The scanner is designed to operate with USB 3.1 or USB 2.0, but will function in a USB 1.1 port. If you are using a USB 1.1 connection, update your USB connection. * When scanning wirelessly, other network traffic can slow performance. * Several settings, such as active feeding and enhanced stacking, can slow the scanner. Experiment to find the settings that work best for you.
M
melanie39Aug 6, 2025
What to do if images are not being cropped correctly with my Kodak Scanner?
- G
  glendacampbellAug 6, 2025
  If the cropping options (Automatically Detect and Straighten or Automatically Detect) are enabled and your images are not being cropped correctly, clean the imaging area. Also, ensure that the pages are straightened in the input tray before scanning.
H
Haley JordanAug 10, 2025
How to fix Kodak S2000 Scanner that will not scan or feed pages?
- A
  Andrea WilsonAug 10, 2025
  If your Kodak scanner won't scan or feed pages, check the following: * Ensure the power adapter is securely plugged into the back of the scanner and the wall outlet. * Verify the wall outlet is not defective. * Confirm the PC was restarted after installing the software. * Make sure the page(s) are in contact with feed rollers and the paper present sensor. * Check that the scanner power light is on and the display screen indicates the scanner is ready.
E
eric72Aug 14, 2025
What to do if my Kodak S2000 images have black background bleed-through?
- B
  Brenda MillerAug 15, 2025
  When scanning translucent paper, black bleed-through may appear on the image. To minimize this, adjust the Contrast and Brightness values or select Draft (Fixed) in TWAIN or Fixed Processing in ISIS to improve the image.
A
Amanda YoungAug 18, 2025
Why does my Kodak Scanner show 'Length protection active' message?
- M
  Monica WilsonAug 18, 2025
  The “Length protection active” message appears because the combination of driver settings may result in a jam message when scanning occurs. If a jam message occurs, adjust one or more of these settings in the scanner driver: * reduce the maximum document length * lower the image resolution * turn on compression * lower compression quality * change to simplex scanning * change the image type (color, gray scale, or black and white) * turn off Dual Stream * turn off Auto Color Detection.
M
Michael RoblesAug 25, 2025
What causes roller marks on paper after scanning with Kodak S2000 Scanner?
- J
  Janet SummersAug 25, 2025
  Roller marks can appear on the paper after scanning if the rollers are dirty. Scanning pages with wet ink will cause ink to transfer to the tires, and from the tires to your pages. Do not scan pages unless the ink on them is dry.
M
matthewyoungAug 27, 2025
What to do if paper is too wide for the input tray of my Kodak S2000?
- Z
  Zachary AndersonAug 27, 2025
  If the paper is too wide for the input tray: * Move the side guide lock to the LTR setting if it is on the A4 setting. * For oversize pages, see “Oversize paper” on page 35.

Summary

Safety Information

User Precautions

Important safety guidelines for scanner operation and placement.

Acoustic Emission

Information regarding noise levels emitted by the scanner.

Scanner Overview

Scanner Models and Specifications

Details on different Kodak scanner models and their technical specifications.

Supporting Documentation and Accessories

Lists additional documentation and optional accessories for the scanners.

Scanner Components

Component Views (Front, Back, Inside, Underside)

Visual identification and description of scanner parts from various views.

Scanner Interface and Setup

Display and Button Controls

Explanation of scanner interface and control buttons for different models.

Initial Installation and Setup

Steps for unpacking and setting up the scanner for first use.

Software and Firmware Management

Driver and Software Installation

Guidance on installing scanner drivers and related software.

Firmware Verification and Updates

Procedures to check and update the scanner's firmware.

Advanced Installation Steps

Network Configuration for S2060 w;S2080 w

Specific configuration steps for network connectivity on certain models.

Basic Scanning Operations

Scanner Controls and States

How to use scanner controls and understand different operational states.

Document Preparation for Scanning

Getting Scanner and Pages Ready

Procedures for preparing the scanner and documents for scanning.

Network Scanning Features

Sharing Scanner Among Multiple PCs

Instructions for allowing multiple PCs to access the scanner over a network.

Advanced Scanning Configurations

Restricting Scanner Access to One PC

Steps to limit scanner access to a single designated PC.

Scanner Display and States

S2040;S2050;S2070 Scanner Display

Explanation of the display and states for specific scanner models.

Scanning Modes and Handling

Waiting, Pause, and Document Handling

How to manage scanning states and document feeding behavior.

Scanner Settings and Conventions

Scanner Settings Menu

Accessing and configuring scanner options like network and power.

Paper Handling Techniques

Input Tray Capacity and Document Prep

Information on tray limits and best practices for preparing documents.

Reliable Feeding and Maintenance

Reliable Feeding and Mixed Paper

Techniques for ensuring reliable feeding with various paper types.

Scanner Meters and Cleaning Needs

Using scanner meters to track cleaning and replacement schedules.

Specialized Document Scanning

Specialized Document Handling

Procedures for scanning lightweight, small items, and NCR paper.

Long and Oversize Paper Scanning

Handling Long and Oversize Paper

Methods for scanning documents of varying sizes and fragility.

Fragile Document Handling

Handling Fragile and Delicate Pages

Methods to protect delicate documents during scanning.

Multifeed Management

Detecting and Resolving Multifeeds

Understanding and managing situations where multiple pages are fed.

Image Quality and Troubleshooting

Improving Image Quality Settings

Adjustments for enhancing scanned image appearance.

General Troubleshooting Advice

Tips for resolving persistent scanning issues.

Scanner Power Management

Turning Scanner Off and On

Procedures for powering the scanner down and waking it up.

Troubleshooting Scanner Issues

Scanner Error Indicators and Exception Handling

Understanding error messages and resolving correctable scanner conditions.

Self-Help for Problems

Self-Help for Common Problems

A guide to resolving frequent issues without technical support.

Contacting Technical Support

How to Contact Support

Information on how to reach Kodak Alaris for technical assistance.

Regulatory Information

Environmental Information

Guidelines related to environmental compliance and disposal.

EMC and Wireless Compliance

EMC Statements for S2000 Series Scanners

Compliance statements for electromagnetic compatibility for S2000 series.

Warranty Information

Limited Warranty Details

Terms and conditions of the product's limited warranty.

Warranty Exclusions and Disclaimers

Conditions under which the warranty is voided and limitations of liability.

Obtaining Warranty Service

Procedures for Warranty Service

Steps for requesting warranty support and service.

Kodak S2000 Series Specifications

General

Optical Resolution	600 dpi
Duplex Scanning	Yes
Output Resolution	600 dpi
Illumination	LED
Operating System Compatibility	Windows
Maximum Document Size	216 x 356 mm