EasyManua.ls Logo

Kodak S2070 - User Manual

Kodak S2070
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
A-61931
User’s Guide
S2000/2000w Series Scanners

Table of Contents

Questions and Answers

  • S
    Samantha BryantAug 5, 2025
    Why is my Kodak S2070 running slow?
    • J
      Jeffrey McbrideAug 6, 2025
      There are several reasons why your Kodak scanner might be running slow: * Your PC may not meet the minimum requirements for the scanner. * The scanner is designed to operate with USB 3.1 or USB 2.0, but will function in a USB 1.1 port. If you are using a USB 1.1 connection, update your USB connection. * When scanning wirelessly, other network traffic can slow performance. * Several settings, such as active feeding and enhanced stacking, can slow the scanner. Experiment to find the settings that work best for you.
  • B
    Briana OwenAug 10, 2025
    What to do if images are not being cropped correctly with my Kodak S2070?
    • M
      Mercedes SteinAug 10, 2025
      If the cropping options (Automatically Detect and Straighten or Automatically Detect) are enabled and your images are not being cropped correctly, clean the imaging area. Also, ensure that the pages are straightened in the input tray before scanning.
  • K
    kelly39Aug 14, 2025
    How to fix Kodak S2070 Scanner that will not scan or feed pages?
    • R
      Robin PerezAug 14, 2025
      If your Kodak scanner won't scan or feed pages, check the following: * Ensure the power adapter is securely plugged into the back of the scanner and the wall outlet. * Verify the wall outlet is not defective. * Confirm the PC was restarted after installing the software. * Make sure the page(s) are in contact with feed rollers and the paper present sensor. * Check that the scanner power light is on and the display screen indicates the scanner is ready.
  • S
    Sean DavisAug 19, 2025
    What to do if my Kodak S2070 images have black background bleed-through?
    • P
      pamela72Aug 19, 2025
      When scanning translucent paper, black bleed-through may appear on the image. To minimize this, adjust the Contrast and Brightness values or select Draft (Fixed) in TWAIN or Fixed Processing in ISIS to improve the image.
  • T
    Troy SmithAug 23, 2025
    Why does my Kodak Scanner show 'Length protection active' message?
    • R
      ryan25Aug 23, 2025
      The “Length protection active” message appears because the combination of driver settings may result in a jam message when scanning occurs. If a jam message occurs, adjust one or more of these settings in the scanner driver: * reduce the maximum document length * lower the image resolution * turn on compression * lower compression quality * change to simplex scanning * change the image type (color, gray scale, or black and white) * turn off Dual Stream * turn off Auto Color Detection.
  • S
    Shannon MartinAug 27, 2025
    What causes roller marks on paper after scanning with Kodak S2070?
    • J
      John NewmanAug 27, 2025
      Roller marks can appear on the paper after scanning if the rollers are dirty. Scanning pages with wet ink will cause ink to transfer to the tires, and from the tires to your pages. Do not scan pages unless the ink on them is dry.
  • G
    gregorymasseyAug 31, 2025
    What to do if paper is too wide for the input tray of my Kodak S2070?
    • O
      odonnelljessicaAug 31, 2025
      If the paper is too wide for the input tray: * Move the side guide lock to the LTR setting if it is on the A4 setting. * For oversize pages, see “Oversize paper” on page 35.

Summary

Safety Information

User Precautions

Describes safe placement and handling procedures for the scanner to prevent hazards.

Scanner Installation Guide

Driver and Firmware Installation

Procedures for installing scanner drivers and verifying/updating firmware.

Scanning Operations

Document Preparation and Feeding

Guides on preparing documents and handling paper challenges for reliable feeding.

Maintenance and Troubleshooting

Troubleshooting Common Issues

Explains error indicators, problem-solving steps, and how to contact support.

Warranty Information

Obtaining Warranty Service

Procedures for requesting service, shipping, and available service options.

Contacting Kodak Alaris for Support

Information on how to get technical support and warranty service.

Kodak S2070 Specifications

General IconGeneral
Optical Resolution600 dpi
Maximum Resolution1200 dpi
Color Depth24-bit
Grayscale Depth8-bit
ADF Capacity80 sheets
Recommended Daily Volume7000 pages
Output File FormatsPDF, JPEG, TIFF, BMP, RTF, searchable PDF
Operating System CompatibilityWindows
Max Document Size8.5" x 14" (Legal)
Scan SpeedUp to 70 ppm / 140 ipm
Scan Speed (Black & White, A4, 200 dpi)70 ppm

Related product manuals