A-61981 20 April 2022 21
3 Scanner Adjustments
Adjusting the input
tray
You can adjust the input tray to accommodate your scanning needs.
• Adjusting the side guides — the side guides can be moved in or out to
accommodate document size. When adjusting the side guides, place your
hands on the bottom of the side guides, over the slots in the tray to slide the
guides in and out.
• Adjusting the input tray for document length — the input tray extender
has two positions. When you are scanning lettersize or A4 documents in
landscape mode, you do not need to pull out the input tray extender.
- Document lengths up to 11 inches / 27.94 cm — pull the extender out
to the first position.
- Document lengths from 11 to 17 inches / 27.94 to 43.2 cm — pull the
extender out to the full position.
To Next Page
Loading...
