A-61981 20 April 2022 49
5 Maintenance
Chapter overview This chapter describes the required cleaning and maintenance procedures for
the KODAK S2085f/S3060/S3060f/S3100/S3100f/S3120/S3120 Max/S3140
Max Scanner. The frequency of these procedures will vary with different
scanning environments, paper types and image processing requirements.
High volumes of scanning will demand more frequent cleaning of the scanner
and more frequent replacement of consumables. Years of production scanning
experience proves that properly cleaning and maintaining your scanner will
result in scanning more paper in less time with less issues. A properly
maintained KODAK S2085f/S3060/S3060f/S3100/S3100f/S3120/S3120 Max/
S3140 Max Scanner will provide years of trouble-free operation.
Scanner consumables (tires, pre-separation pads, etc.) and cleaning supplies
are available for purchase from Kodak Alaris (see “Supplies and consumables”
on page 60). Consumables are sold in kits. The kits contain the proper mix of
tires, rollers, and pre-separation pads so you can easily replace them at the
recommended rate. For example, only replacing the tires and never replacing
the separation roller will eventually minimize scanner performance. Replacing
the consumables at the recommended frequency will ensure the best
performance.
Cleaning tools and
materials
Use only these cleaning tools and materials when performing routine
maintenance on your scanner. Use of any other cleaning materials could
damage your scanner.
• KODAK Digital Science Transport Cleaning Sheets
• KODAK Roller Cleaning Pads
• Staticide wipes for KODAK Scanners
• A vacuum cleaner and tools
Optionally:
• Brillianize Detailer wipes
• Lint-free cloth
To Next Page
Loading...
