DYMO File Setup
© 2008 Newell Rubbermaid. All Rights Reserved 7
6 In the Select Scan Folder dialog box, click Browse to locate the Folder to monitor
for scanned documents.
This folder must match the folder location that was specified in the smart touch
shortcut on page 3. If someone else completed the smart touch shortcut setup for your
group, contact that person for the location of the folder.
7 Click Next and follow the on-screen instructions to complete the First Run Wizard.
Additional steps include scanning a document to test your setup.
Using DYMO File Settings
If you have already run the First Run Wizard, you can use DYMO File Settings to provide
or change connection and file-location information quickly.
To use DYMO File Settings
1 Start DYMO File.
2 Choose Edit > Settings, and select the Scan tab.
3 Select My Network.
Select this option even if the ScanMate i1120 scanner is connected directly to your
computer.
Folder that DYMO File
will monitor for scanned
documents
Browse button
Scan tab
My Network option
Folder that DYMO File
will monitor for scanned
documents
To Next Page
Loading...
