Kodak SPECIAL

A cut-away or "X-Ray" view of the Cine-Kodak Special.
The first method is to adopt the routine previously described under
DISSOLVING-OUT OBJECTS WITHIN A SCENE. With this tech-
nique the following scene could be made: A finished product appears on
the screen;
the outer housing fades away showing the mechanism
housing;
the mechanism housing fades away showing the working
parts; some of the working parts fade away to emphasize the design and
construction
of other working parts. To make such a scene, first photo-
graph the finished product; fade out; wind back and remove the outer
housing;
"fade -in" and photograph the product without the outer
housing; etc., etc.
The second method is
that of following the procedure for making
63