English
43
Enable Wi-Fi
Enable or disable the wireless network for this unit.
1 From the Control panel, navigate to
[Home > Setup > Enable Wi-Fi], then press
.
Setup
Paper Setup
Network Status
Wi-Fi Setup
Enable Wi-Fi
Back
OK
Select
2 Press the to select [Enable] or
[Disable].
3 Press to confirm.
Enable Wi-Fi
Enable
Disable
Cancel
OK
Select
Device Setup
You can set the following unit settings.
Language
1 From the Control panel, navigate to [Home
> Setup > Device Setup > Language], then
press
.
Device Setup
Language English
Sleep 10min
Usage Tracking
Software Version
Back
OK
Select
2 Press the to select the desired
language from [English], [Español], or
[Français], then press
.
Language Select
English
Español
Français
Cancel
OK
Select
3 Press to confirm. If you would like to
change the chosen language, press
to return to the [Device Setup] screen.
Language Select
You have chosen
English as
the language
for your printer.
Cancel
OK
Sleep
1 From the Control panel, navigate to [Home
Menu > Setup > Device Setup > Sleep],
then press
.
Device Setup
Language English
Sleep 10min
Usage Tracking
Software Version
Back
OK
Select
2 Select Sleep Time (Time before the unit
goes into sleep mode) from [1] minute to
[120] minutes. Use
to increase the
Sleep Time or
to decrease the Sleep
Time.
3 Press to confirm.
Sleep
Set Sleep Time
UP
10
Down
Cancel
OK
Setting
Usage Tracking
1 From the Control panel, navigate to [Home
> Setup > Device Setup > Usage Tracking],
then press
.
Device Setup
Language English
Sleep 10min
Usage Tracking
Software Version
Back
OK
Select
2 Press the to select [Don't
allow] or [Allow].
3 Press to confirm.
Usage Tracking
Periodically send the
info of your printer.
Allow
Don't allow
OK
Select
Software Version
1 From the Control panel, navigate to
[Home > Setup > Device Setup > Software
Version], then press
.
Device Setup
Language English
Sleep 10min
Usage Tracking
Software Version
Back
OK
Select
2 Press .
Software Version
*.**.***
Back
Continued on next page.
To Next Page
Loading...
