English
50
Software Update
• If the firmware update for this unit is available, the Update
button is displayed. Press it and start to update the firmware.
• When the firmware is the latest version, the Update button is not
displayed.
Login Password
• Once you have logged in to the Web interface with "admin", you
need to change the Password.
Note(s) ❏
• Record the Password in case you forget it.
• If you have forgotten the Password, you can perform [Restore
Factory Default] to reset all settings, including the Password, to
their factory default. After resetting the unit, you can login with
the default Password "admin".
• Passwords may only contain alphanumeric characters, and are
from 1 to 32 characters in length.
• The default Password "admin" provides you with full access to
all setup functions, but can allow access by an unauthorized third
party. It is recommended that you change the Password.
To Next Page
Loading...
