TP-6068 10/028 Section 3 Scheduled Maintenance
3.2 Service Schedule—4--20EFOZ and 5--24EOZ Models
Perform Service at Intervals
Indicated (X)
Reference
Section
Daily
Every
50 Hrs.
or 1
Month
Every
200 Hrs.
or 3
Months
Every
400 Hrs.
or 6
Months
Every
1000 Hrs.
or Yearly
FUEL SYSTEM
Check the fuel level and fill as necessary 3.5
X
(Before
operation)
Check for any abnormal fuel injection sound [
X
(During
operation)
Remove the sediment from the fuel tank and drain
the fuel tank [w
X
Clean the fuel filter *
(4/6.5EFOZ and 5/8EOZ models only)
3.5.2 X
Replace the fuel filter element * 3.5.2 X
Check the fuel injection nozzles/check the injection
spray condition *[]
X
Check the fuel injection timing *[]
X
Check the fuel injection pump *[]
X
LUBRICATION SYSTEM
Check the crankcase oil level and add oil as
necessary
3.4.2
X
(Before
operation)
Replace the oil in the crankcase * 3.4.3
X
(Break-in
period)
X
Replace the lube oil filter element * 3.4.3
X
(Break-in
period)
X
COOLING SYSTEM
Check the coolant level and fill as necessary * 3.8.2
X
(Before
operation)
Check the seawater outlet and clean as necessary 3.7 X
Adjust the seawater pump belt tension * 3.9.1
X
(Break-in
period)
X
Check the function of the siphon break, if equipped 3.8.6 X
Check the heat exchanger anticorrosion zinc
condition, if equipped *
3.8.7 X
Check/replace the seawater pump impeller *[
3.8.5
X
(Check)
X
(Replace)
Replace the coolant *[
3.8.3 X
Replace the heat exchanger anticorrosion zinc
anode, if equipped *[
3.8.7 X
* Requires removal of the sound shield door, if installed
[ Consult your local distributor/dealer for service
] Read the WARNING found at the beginning of the manual regarding moving parts
w Consult the operating instructions supplied with the craft