Kohler 12RESVL Installation Instructions

TT-1619 7/15b
INSTALLATION INSTRUCTIONS
Original Issue Date: 2/14
Model: 8/10/12RESV(L), 14/20RESA/RESAL, and 20RESC/RESCL
Market: Residential/Light Commercial
Subject: Mounting Pad Kits GM90969-KP1-QS, GM90969-KP2-QS,
GM92228-KP1-QS, and GM92228-KP2-QS
Introduction
Concrete mounting pads allow easy installation of the
Kohlerr residential generator models listed above.
Mounting pads are available in 3 inch and 4 inch
thicknesses. The 4 inch hurricane pad has a wind rating
of 175 mph and is recommended for storm-prone areas.
Note: Refer to the generator Installation Manual for
important clearance information and location
requirements before installing the generator
mounting pad.
Read the entire installation procedure and compare the
kit parts with the parts list at the end of this publication
before beginning the installation. Perform the steps in
the order shown.
Specifications
Kit Number
GM90969-KP1-QS GM90969-KP2-QS
Models
14/20RESA(L)
20RESC(L)
14/20RESA(L)
20RESC(L)
Thickness 76 mm (3 in.) 102 mm (4 in.)
Weight, each 86 kg (190 lbs.) 125 kg (275 lbs.)
Wind rating NA 175 mph
Kit Number
GM92228-KP1-QS GM92228-KP2-QS
Models
8/10/12RESV(L) 8/10/12RESV(L)
Thickness 76 mm (3 in.) 102 mm (4 in.)
Weight, each 61 kg (135 lbs.) 84 kg (185 lbs.)
Wind rating NA 175 mph
3/8--16 insert, qty 4
620 mm
(24.4 in.)
1190 mm
(46.9 in.)
787 mm
(31 in.)
1372 mm (54 in.)
471 mm
(18.6 in.)
270 mm
(10.6 in.)
940 mm (37 in.)
GM92228-KP1-QS
945 mm (37.2 in.)
GM92228-KP2-QS
650 mm
(25.6 in.)
864 mm (34 in.)
GM92228-KP1-QS
869 mm (34.2 in.)
GM92228-KP2-QS
3/8--16 insert, qty 4
76 mm (3 in.) GM92228-KP1-QS
102 mm (4 in.) GM92228-KP2-QS
Curved Edge
Curved Edge
8/10/12RESV(L)
14/20RESA(L), 20RESC(L)
750 mm
(29.5 in.)
76 mm (3 in.) GM90969-KP1-QS
102 mm (4 in.) GM90969-KP2-QS
Figure 1 Mounting Pad Dimensions

Kohler 12RESVL Specifications

General

Brand	Kohler
Model	12RESVL
Category	Portable Generator
Language	English