TP-6694 6/22 131
Section 6. Accessories
6.1 Accessories and Connections
Several accessories help finalize installation, add convenience to operation and service, and establish state and local code
compliance.
Accessories vary with each generator set model and controller. Select factory-installed and/or shipped-loose accessories.
See Figure 60 for a list of available kits. Obtain the most current accessory information from your local authorized service
distributor/dealer.
This section illustrates several accessories available at print time of this publication. Accessory kits generally include installation
instructions. See wiring diagrams manual for electrical connections not shown in this section. See the installation instructions
and drawings supplied with kit for information on kit mounting location.
The instructions provided with the accessory kit supersede these instructions where there are differences. In general, run AC
and DC wiring in separate conduit. Use shielded cable for all analog inputs. Observe all applicable national, state, and local
electrical codes during accessory installation.
See the section titled: Accessory Connections for terminal identification.
To Next Page
Loading...
Need help?
General
