TP-6774 2/14a54 Section 7 Controller
System Events Display Message List
Description Display Message
Warning
Function
Shutdown
Function
Status/
Notice
Relay
Output
Engine Functions
Engine over speed Eng Speed High Shutdwn X X
Engine start aid active Preheat N X
Engine under speed Eng Speed Low Shutdwn X X
High battery voltage Battery High Warning X X
High coolant temperature Coolnt Temp High Warning X X
High coolant temperature Coolnt Temp High Shutdwn X X
High exhaust temperature Exh Temp High Shutdwn X X
Low battery voltage Battery Low Warning X X
Low seawater pressure Sea Pressure Low Shutdwn X X
Low cranking voltage Lo Crank Vlt Warning X X
Low oil pressure Oil Pres Low Warning X X
Low oil pressure Oil Pres Low Shutdwn X X
Overcrank Over Crank Shutdwn X X
General Functions
Aux. inputs 0--5 VDC, 1 analog Aux Input Shutdwn X X
Backup parameters loaded Backup Pars Status S No
Engine start delay active Start Delay Notice N X
Engine started Engine Start S tatus S X
Engine stopped Engine Stop Status S X
Generator running Gen Running Notice N X
Remote start Remote Start Status S X
System ready System Ready Status S X
System timer failed TimerErrorNotice N X
Generator Functions
AC sensing loss AC Sens Loss Warning X X
AC sensing loss AC Sens Loss Low Shutdwn X X
Locked rotor (failed to crank) Locked Rotor Shutdwn X X
Overfrequency Frequency High Shutdwn X X
Overvoltage (each phase) Volts xx--xx High Shutdwn X X
Underfrequency Frequency Low Shutdwn X X
Undervoltage (each phase) Volts xx--xx Low Shutdwn X X
* Some functions require optional input sensors or are engine ECM dependent on some generator set models.
To Next Page
Loading...
