Kohler 6EOD - Service Schedule-8 EOZD and 6.5 EFOZD Models

TP-6252 2/0826 Section 3 Scheduled Maintenance
3.3 S ervice Schedule—8EOZD and 6 .5EFOZD Models
Perform Service at Intervals
Indicated (X)
Reference
Section
Daily
Every
50 Hrs.
or 1
Month
Every
200 Hrs.
or 3
Months
Every
400 Hrs.
or 6
Months
Every
1000 Hrs.
or Yearly
FUEL SYSTE M
Check the fuel level and fill as necessary 3.6
X
(Before
operation)
Check for any unusual noise [
X
(During
operation)
Remove the sediment from the fuel tank and drain
the fuel tank [
w
X
Clean the fuel filter * 3.6.2 X
Fuel/water separator draining *[ X
Fuel/water separator cleaning *[ X
Replace the fuel filter element * 3.6.2 X
Fuel injection valve—
Check the injection condition *[]
Eng. S/M
X
(300 hrs.)
Fuel injection pump—
Check the injection timing *[]
Eng. S/M
X
(500 hrs.)
LUBRICATION SYSTEM
Check the crankcase oil level and add oil as
necessary
3.5.2
X
(Before
operation)
Replace the oil in the crankcase * 3.5.3
X
(Break-in
period)
X
(150 hrs.)
Replace the lube oil filter element * 3.5.3
X
(Break-in
period)
X
(300 hrs.)
COOLING SYSTEM
Check the coolant level and fill as necessary * 3.9.2
X
(Before
operation)
Check the seawater outlet and clean as necessary 3.8 X
Adjust the seawater pump belt tension * 3.10.1
X
(Break-in
period)
X
Check the function of the siphon break, if equipped 3.9.6 X
Check the heat exchanger anticorrosion zinc
condition, if equipped *
3.9.7
X
(100 hrs.)
Check/replace the seawater pump impeller *[
3.9.5
X
(Check)
X
(Replace)
Replace the coolant *[
3.9.3 X
Replace the heat exchanger anticorrosion zinc
anode, if equipped *[
3.9.7 X
* Requires removal of the sound shield door, if installed
[ Consult your local distributor/dealer for service
] Read the WARNING found at the beginning of the manual regarding moving parts
w Consult the operating instructions supplied with the craft