TP-6252 2/0828 Section 3 Scheduled Maintenance
3.4 S ervice Schedule—9--32EOZD and 7--27EFOZD Models
Perform Service at Intervals
Indicated (X)
Reference
Section
Daily
Every
50 Hrs.
or 1
Month
Every
250 Hrs.
or 3
Months
Every
500 Hrs.
or 6
Months
Every
1000 Hrs.
or Yearly
FUEL SYSTE M
Check the fuel level and fill as necessary 3.6
X
(Before
operation)
Check for any unusual noise [
X
(During
operation)
Remove the sediment from the fuel tank and drain
the fuel tank [
w
X
Bleed the fuel system (if encountering hard starting) 3.6.3 X
Replace the fuel filter element * 3.6.2 X
Fuel/water separator draining *[ X
Fuel/water separator cleaning *[ X
Inspect the fuel injection nozzle pressure *[]
Eng. S/M X
Adjust the fuel injection timing *[]
Eng. S/M
X
(2000 hrs.
or 2 yrs.)
Inspect and adjust the fuel injection pump *[]
Eng. S/M
X
(2000 hrs.
or 2 yrs.)
LUBRICATION SYSTEM
Check the crankcase oil level and add oil as
necessary
3.5.2
X
(Before
operation)
Replace the oil in the crankcase * 3.5.3
X
(Break-in
period)
X
Replace the lube oil filter element * 3.5.3
X
(Break-in
period)
X
COOLING SYSTEM
Check the coolant level and fill as necessary * 3.9.2
X
(Before
operation)
Check the seawater outlet and clean as necessary 3.8 X
Check/adjust the seawater pump belt tension * 3.10.1
X
(Break-in
period)
X
Check the function of the siphon break, if equipped 3.9.6 X
Check the heat exchanger anticorrosion zinc
condition, if equipped *
3.9.7
X
(100 hrs.)
Check/replace the seawater pump impeller *[
3.9.5
X
(Check)
X
(Replace)
Replace the coolant *[
3.9.3 X
Replace the heat exchanger anticorrosion zinc
anode, if equipped *[
3.9.7 X
* Requires removal of the sound shield door, if installed
[ Consult your local distributor/dealer for service
] Read the WARNING found at the beginning of the manual regarding moving parts
w Consult the operating instructions supplied with the craft
To Next Page
Loading...
