TP-6774 2/14a50 Section 7 Controller
System Warning Fault Lamp. Green/Red lamp
identifies an existing fault condition that does not shut
down the generator set. A continuing system warning
fault condition may cause a system shutdown. Correct
all system warnings as soon as practical.
See Section 7.10.5, System Fault Warning Lamp with
Digital Displays, for definitions of the items listed. The
following conditions cause a system warning:
D AC sensing loss
D High battery voltage
D High coolant temperature
D Low battery voltage
D Low cranking voltage
D Low oil pressure
System Shutdown Fault Lamp. Red lamp indicates
that the generator set has shut down because of a fault
condition. The unit will not start without resetting the
controller, see Section 7.10.2, Controller Resetting
procedure.
See Section 7.10.6, System Fault Shutdown Lamp with
Digital Displays, for definitions of the items listed. The
following conditions cause a system shutdown:
D AC sensing loss
D Auxiliary input (analog or digital)
D Engine over speed
D Engine under speed
D High coolant temperature
D High exhaust temperature
D Locked rotor (failed to crank)
D Low seawater pressure
D Low oil pressure
D Overcrank
D Overfrequency
D Overvoltage (each phase)
D Underfrequency
D Undervoltage (each phase)
To Next Page
Loading...
Need help?
General
