Kohler 7000 Series

2
5. Route the new 8" long evap line from the
T-Fiing to the plugged port on the air
cleaner base. Remove and discard the plastic
cap at that location. See Figure 4.
Figure 4. Connect New 8" Long Evap Line to
Air Cleaner Base.
6. Reassemble the engine following service
manual reassembly procedures as
needed. Run the engine to conrm engine
performance.
Normal warranty terms apply. Submit warranty
claim using 25 326 71-S as the Defective Part
Number and ZZ (Other) as the Failure Code.
Labor Time of up to 0.5 hour using Labor Code
9999 for Misc Labor.
Remove Plastic Cap
and Connect New 8"
Long Evap Line
Breather Hose
Location